Hamilton-beach Smooth Edge Manuel d'utilisateur télécharger pdf (Page 3)

Hints for Best Use

• The can opener will easily open all standard size cans.

• On some models it will be necessary to position can opener

at edge of counter, allowing for clearance to open cans

taller than the can opener.

• If there is a bump, dent, or heavy seam in the rim of the

can, open the other end of the can or start cutter just

beyond the problem area.

• The motor of your can opener is permanently lubricated

and will require no oiling.

• To use the cord storage on the back of the opener, push in

or pull out the cord as needed.

Sharpening Knives

1. Place cutting edge of knife in the

knife slot located on the back of

the can opener. See Figure 4.

2. Draw the knife blade through the

slot several times.

NOTE: Serrated blades should never

be inserted into this unit.

How to Use Your Can Opener

This is new technology – does not need a magnetic arm.

1. Place can opener on level surface.

2. Plug cord into electrical outlet.

3. ON/OFF Switch must be in OFF position. See Figure 1.

Place rim of can up and under lid opener. See Figure 2.

OFF

position

4. Hold can and push Switch down.

See Figure 3. Can will be held in

place as long as switch is down.

5. Hold Switch down until can

makes one (1) full rotation totally

separating lid from can. Lid may

spin in reverse when completely

severed.

NOTE: Do not allow can to keep

rotating as the can opener may

continue to cut the can.

6. Release Switch and push back to OFF position.

Figure 1

Figure 2

Figure 3

Lid

Opener

Figure 4

7. To remove can, push down on lid and tilt can top toward can

opener. Pull can down and away from cutting wheel.

8. Remove lid from top of can and check can contents to

remove any pieces of label or metal shavings.

840082700 ENv01.qxd 2/20/01 10:02 AM Page 4

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Hamilton-beach Smooth Edge Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Couteaux Hamilton-beach Smooth Edge